Third generation CNC AirsoftPro chamber for rifle manufacturer WELL (compatible models below). Compared to the basic cast chamber, the AirsoftPro chamber brings a number of advantages.

First and foremost is very good sealing and workmanship, i.e. high potential for increased performance. Another big advantage is the possibility to use the chamber for both original WELL barrels and rubber bands and for AEG barrels and rubber bands primarily designed for electric guns. The user can thus decide whether to use the chamber with the original barrel for the time being, or to invest in an AEG precision barrel, of which there is a large selection on the market.

The AEG Adapter, which allows the use of an AEG barrel, replaces the o-ring from previous generations of chambers. It is specially shaped to minimize air loss and for the best possible seal. On our test setup, just by changing the chamber, we achieved a 7 m/s performance increase (130 m/s vs 137 m/s).

Compatibility:

• The chamber is compatible with original Well barrels and rubber bands. No modifications are required for use.
  
• Using the included AEG Rubber Adapter, the barrels can also be used with the rubber from electric guns (AEG) with better sealing results than the o-ring provided.
  
• A steel regulation ring is included with the chamber. Thus the chamber regulation is the same as the original Well chamber.
  
• There is a thread in the top of the chamber for the eventual bolting on of a TDC device.
  
• The chamber is compatible with Well MB01, MB04, MB05, MB06, MB08, MB13, MB14, G21, G22, ASG AW308 L96, Maruzen L96.

Weight: 36g